bat54-v-g, BAT54A-V-G, bat54c-v-g, bat54s-v-g document number 83344 rev. 1.0, 28-jun-10 vishay semiconductors www.vishay.com 1 top vie w top vie w bat54-v-g bat54c-v-g BAT54A-V-G bat54s-v-g 1 8 034_3 1 3 1 3 1 3 1 2 2 2 2 3 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com small signal schottky diodes, single and dual features ? these diodes feature very low turn-on voltage and fast switching ? these devices are protected by a pn junction guard ring against excessive voltage, such as electrostatic discharges ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec mechanical data case: sot-23 weight: approx. 8.1 mg packaging codes/options: 18/10k per 13" reel (8 mm tape), 10k/box 08/3k per 7" reel (8 mm tape), 15k/box parts table absolute maximum ratings t amb = 25 c, unless otherwise specified note 1) device on fiberglass substrate, see layout on next page. thermal characteristics t amb = 25 c, unless otherwise specified note 1) device on fiberglass substrate, see layout on next page. ** please see document ? v ishay material category policy?: www.vishay.com/doc?99902 part ordering code type marking remarks bat54- v -g bat54- v -g-18 or bat54- v -g-08 l8 tape and reel bat54a- v -g bat54a- v -g-18 or bat54a- v -g-08 l46 tape and reel bat54c- v -g bat54c- v -g-18 or bat54c- v -g-08 l47 tape and reel bat54s- v -g bat54s- v -g-18 or bat54s- v -g-08 l48 tape and reel parameter test condition symbol v alue unit repetitive peak reverse voltage v rrm 30 v forward continuous current i f 200 1) ma repetitive peak forward current i frm 300 1) ma surge forward current current t p < 1 s i fsm 600 1) ma power dissipation p tot 230 mw parameter test condition symbol v alue unit thermal resistance junction to ambient air r thja 430 1) k/w junction temperature t j 125 c storage temperature range t stg - 65 to + 150 c
www.vishay.com 2 document number 83344 rev. 1.0, 28-jun-10 bat54-v-g, BAT54A-V-G, bat54c-v-g, bat54s-v-g vishay semiconductors for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com electrical characteristics t amb = 25 c, unless otherwise specified layout for r thja test thickness: fiberglass 1.5 mm (0.059 in.) copper leads 0.3 mm (0.012 in.) typical characteristics t amb = 25 c, unless otherwise specified parameter test condition symbol min. ty p. max. unit reverse breakdown voltage i r = 100 a (pulsed) v (br) 30 v leakage current pulse test t p < 300 s, < 2 % at v r = 25 v i r 2a forward voltage i f = 0.1 ma, t p < 300 s, < 2 % v f 240 m v i f = 1 ma, t p < 300 s, < 2 % v f 320 m v i f = 10 ma, t p < 300 s, < 2 % v f 400 m v i f = 30 ma, t p < 300 s, < 2 % v f 500 m v i f = 100 ma, t p < 300 s, < 2 % v f 800 m v diode capacitance v r = 1 v , f = 1 mhz c d 10 pf reverse recovery time i f = 10 ma to i r = 10 ma, i r = 1 ma, r l = 100 t rr 5ns 17451 15 (0.59) 12 (0.47) 0. 8 (0.03) 5 (0.2) 7.5 (0.3) 3 (0.12) 1 (0.4) 1 (0.4) 2 (0. 8 ) 2 (0. 8 ) 1.5 (0.06) 5.1 (0.2) figure 1. typical forward v oltage forward current vs. v arious temperatures 1 88 67 1000 100 10 1 0.1 0.01 i - for w ard c u rrent (ma) f 00.4 0.6 1.2 1.4 0. 8 1 0.2 v f - for w ard voltage (v) = 125 c t j 25 c - 40 c figure 2. diode capacitance vs. reverse v oltage v r 1 88 6 8 10 14 12 2 4 0 0 4 12 16 20 24 2 8 c - typical capacitance (pf) d v r - re v erse voltage (v) 6 8 8
bat54-v-g, BAT54A-V-G, bat54c-v-g, bat54s-v-g document number 83344 rev. 1.0, 28-jun-10 vishay semiconductors www.vishay.com 3 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com package dimensions in millimeters (inches): sot-23 figure 3. typical v ariation of reverse current vs. v arious temperatures 100 1000 10 1 0.1 0.01 5101520 02530 v r - re v erse voltage (v) i - re v erse c u rrent ( a) r 1 88 69 = 125 c t j 100 c 75 c 50 c 25 c foot print recommendation: rev. 8 - date: 23.sept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
